Cosmetic glass bottle packaging procurement essentials inventory
Release time:
2019-12-09
1, glass bottles for cosmetics are mainly divided into: skin care products (cream, lotion), perfume, essential oils, nail polish several categories of small capacity, more than 200ml capacity rarely used in cosmetics.
2. Glass bottles are divided into wide-mouthed bottles and narrow-mouthed bottles. Solid paste is generally wide-mouthed bottles, and should be equipped with aluminum oxide caps or plastic caps. Bottle caps can be used for color oil spraying and other effects. Emulsion or aqua paste generally uses narrow-mouthed bottles, which should be equipped with pump heads. Attention should be paid to prevent springs and balls from rusting. At present, most pump heads are equipped with glass beads. Usually, which are used for material tests, thicker emulsions are fitted with macroporous plugs.
3, glass bottle selection is more consistent, more modeling, processing technology is rich, with the bottle cap with diversification, common bottle shape is cylindrical, oval, flat, prismatic, conical, manufacturers often develop a series of bottles. The bottle body process has spraying, transparent, frosted, translucent color, silk screen printing, bronzing, hot silver, etc.
4, screen printing: glass bottle screen printing usually has two kinds, one is high temperature ink screen printing, its characteristic is not easy to decolorization, color is heavy and dumb, purple color is difficult to effect, the other is low temperature ink screen printing, color is more bright, the ink requirements are higher, otherwise easy to fall off, and in the bottle disinfection should pay attention.
5. The spraying effect is generally plus 0.5 yuan -1.1 yuan/piece, depending on the area and color matching difficulty. Silk screen printing is 0.1 yuan/color, cylindrical bottles can be calculated in single color, special-shaped bottles can be calculated in double color or multi-color, and bronzing and silver 0.4 yuan/piece.
6. If the glass bottle is made by hand, there will be a little deviation in the capacity. When selecting, it should be tested and marked with the correct capacity. For example, the automatic production line is more uniform, but the shipment requirement is larger, the cycle is relatively long, and the capacity is relatively stable.
7. The uneven thickness of the glass bottle will easily lead to damage, or it will be easily crushed by the contents under severe cold conditions. The reasonable capacity should be tested during filling. Paper should be used for transportation and separated individually. The product should be equipped with color boxes. The inner support and the middle box can better obtain the anti-vibration effect.
8. The bottle shape commonly used in glass bottles is usually in stock, such as oil bottles, ordinary transparent or frosted bottles. The production cycle of glass bottles is relatively long, which takes 20 days as fast as possible. Some take 45 days for delivery. Generally, the order quantity is 5,000 to 10000. The smaller the bottle type, the larger the quantity to be done. The cycle and the minimum order quantity will be affected by the peak season and the off season.
9. Cost of mold opening: manual mold is around 2500 yuan, automatic mold is generally around 4000 yuan, and 1 out of 4 or 1 out of 8 is around 16000 yuan -32000 yuan, depending on the conditions of the manufacturer.
10. The bottle cap process can be used for anodized aluminum lettering, bronzing edges and etching lines. There are matte colors and bright colors. Gaskets and inner covers should be equipped. It is better to use pressure-sensitive films to strengthen the sealing effect.
11. The essential oil bottle is usually brown or colored and colored frosted, which can avoid light. The lid has a safety ring and can be equipped with an inner plug or dropper. The perfume bottle is generally equipped with a delicate spray pump head or plastic cap.
Nantong Shunyu Packaging Material Co., Ltd.
Telephone:0086-513-86414699
Mobile:0086-13301482618(Cao Zong)
E-mail:1156248028@qq.com
Address: Building 1, Group 28, Diyi Town Community, Tongzhou District, Nantong City, Jiangsu Province
Mobile website QR code
Copyright © 2024 Nantong Shunyu Packaging Material Co., Ltd.